Above-Grade Waterproofing for Tacoma Warehouses, Civic Buildings, Hospitals & Campuses
Commercial Waterproofing Contractors in Tacoma, WA
Much of Tacoma is built of old brick, and brick walls leak in their own way. Rain soaks into the masonry for months at a time, finds its way through worn mortar joints and gaps around window openings, and runs down inside the wall until it shows up as a damp patch or peeling paint indoors. Parapets and cornices at the top of older buildings are often the first to let water in. Near the port, salt air and industrial grime also eat at metal flashings and window frames.
Presto Restoration brings more than 25 years of above-grade commercial waterproofing experience to Tacoma. Our crews repoint mortar joints, reseal window and door perimeters in masonry walls, rebuild and coat parapets, replace expansion and control joints and treat brick, stone and concrete with breathable repellents on warehouses, civic buildings, hospitals and campuses. We also manufacture our own restoration products, including Glass Defender for glass and Leach Stop for precast concrete.
OUR COMMERCIAL WATERPROOFING SERVICES IN TACOMA
Our Tacoma work runs from sealing a single leaking window in a brick wall to waterproofing a whole converted warehouse.
Core Waterproofing Services
Expansion and control joints in Tacoma buildings stay wet for long stretches, and when one opens, rain runs straight into the wall. We remove the failed material, repair damaged edges and install sealant or preformed joint systems sized for the movement.
In a brick building, the joint where the window frame meets the masonry is a common leak point, especially on older punched windows. We cut out failed perimeter sealant, reseal frames and repair gaskets, and glass dulled by port grime can be restored and protected with Glass Defender.
Parapets and cornices on Tacoma’s older brick buildings take the most weather and often let water straight down into the wall. We repoint and rebuild where needed, then coat copings and ledges with high-solids silicone that resists standing water.
Some of Tacoma’s mid-century office and medical buildings still rely on dry glazing gaskets that have hardened with age. Wet glazing adds a continuous silicone seal between glass and frame and stops leaks without replacing the windows.
Concrete and stucco develop fine cracks that let rain in all winter. Elastomeric coatings bridge those cracks and flex with the wall, applied at full thickness in dry weather after larger cracks are repaired.
Old brick soaks up rain steadily through the wet season. Breathable penetrating repellents cut that absorption while still letting moisture escape, which protects masonry that can never be fully sealed.
Specialized Restoration-Waterproofing
Waterproofing is one part of a bigger job. Presto also restores the brick, stone, metal and glass under the seal using products we make ourselves, so one crew handles all of it.
Precast panels can leach salts that leave white streaks as water dries, and salt air near the bay adds to it. Leach Stop is our treatment designed to reduce it. We clean the deposits, treat the panels and reseal their joints.
Metal flashings, copings and frames near the port corrode under salt and industrial air, and every seam relies on sealant. We replace failed joints with sealants made for metal and reseal laps and fasteners.
Our Commercial Waterproofing Process in Tacoma
Every Tacoma waterproofing project follows five steps, and you see our findings and pricing before work begins.
Building Envelope Inspection
We inspect mortar joints, window perimeters, parapets, flashings and joints on every elevation.
Diagnostic Testing
Water tests and moisture readings show where rain is getting into the masonry.
Scope & Specification
Systems are chosen for old brick, salt air and a long wet season, then written into a clear scope.
Waterproofing Installation
Sealants and coatings go on during dry weather so they bond and cure properly.
Project Closeout & Warranty
You receive photos, product data and warranty records.
Talk to Presto About Waterproofing Your Tacoma Building
Damp walls every winter, peeling paint indoors or leaks around windows? Call us or request a quote, and our team will respond to discuss your Tacoma building.
Why Tacoma Property Managers Choose Presto for Commercial Waterproofing
Our crews have waterproofed buildings across the country for more than 25 years. In Tacoma we use breathable systems that suit old brick and plan work around campus, hospital and office schedules.
Trained High-Rise Access
Focused Above-Grade Expertise
25+ Years of Restoration Experience
Fully Insured Nationwide
Our Local Tacoma, WA Support Network
A sealed building stays dry longest with a check each fall before the rains settle in. Presto connects Tacoma owners with a local support network for that everyday care.
For routine upkeep and everyday facility support, owners can also contact our sister companies:
Building Restoration Tacoma: Hands-on exterior repairs for Tacoma buildings.
Building Maintenance Tacoma: Routine maintenance that catches failing joints before the wet season.
Building Services Tacoma: General commercial building support across Pierce County.
Recent Restoration Projects in Washington
Browse Presto’s restoration work in Washington.
Tacoma Commercial Waterproofing FAQs
How often should sealants be replaced on a Tacoma building?
Most joints last 10 to 15 years, and sooner on walls facing the bay or the prevailing storms.
What is the difference between waterproofing and water damage repair?
Waterproofing keeps water out at the exterior. Water damage repair fixes interior finishes after water gets in. We stop the source first so the inside only needs repair once.
Can waterproofing be done while the building is occupied?
Yes. Nearly all the work happens from outside, scheduled around tenants, students and patients.
Why do old brick walls leak even with no obvious cracks?
Brick and mortar absorb rain over months. Water works through worn joints and around window openings, then travels inside the wall before it shows indoors.
How do I know if waterproofing can wait another year?
Damp walls in winter, peeling paint, efflorescence or failed caulking mean it should not wait another wet season. If joints are sound and nothing leaks, planned work over a few years is usually fine.
When is the best time for waterproofing work in Tacoma?
Sealants and coatings need dry surfaces, so we schedule them mostly from June through September. Testing and inspection can happen any time.
Other Tacoma Building Restoration Services
Keep Water Out of Your Tacoma Building
A worn mortar joint can let rain into a wall all winter long. Tell us what you are noticing, and we will help you get it sealed in the next dry stretch.
Call us today at 1-800-785-9927 or click Request A Quote.
